Trending...
- Immigrant Artists Explore Cultural, Historical and Social Experiences in "Unlocked Identities" Exhibition
- Neptune Software to Participate in 2024 SAP for Utilities Conference
- CCHR Seeks Redress for Those Forcibly Held and Harmed in Behavioral Facilities
Copperhill Technologies, a provider of embedded systems for LIN Bus automotive applications, offers a great selection of products for various embedded platforms, such as the Raspberry Pi, the Arduino-compatible Teensy, and breakout boards for generic embedded systems.
GREENFIELD, Mass. - Floridant -- LIN (Local Interconnect Network) is a serial network protocol used for communication between vehicle components. It is a single-wire, serial network protocol that supports communications up to 19.2 Kbit/s at a bus length of 40 meters (~120 feet). Copperhill Technologies offers a variety of embedded solutions for LIN Bus applications.
The Raspberry Pi Pico LIN Bus board supports the programming of automotive applications using MicroPython. The RPi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It features two ARM Cortex-M0+ cores that run up to 133MHz, 256KB RAM, 30 GPIO pins, and a wide range of interfacing options. These features are paired with 2MB of onboard QSPI Flash memory for code and data storage. In addition to powerful hardware resources, the Pico offers rich and complete software support and community resources. It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
More on The Floridant
This PiCAN FD board has a LIN Bus interface, and the Microchip MCP2518FD IC provides classic CAN and CAN FD. A dsPIC33 microcontroller provides the LIN Bus connection. Communication to the Pi is per UART on ttyS0 using ASCII text commands. A sample LIN-bus GUI app is available, written in Python3 and tkinter. The firmware is updatable using the Microchip UnifiedHost java app, which requires the Raspberry Pi to run in GUI mode. There is an easy-to-install SocketCAN driver, and programming is supported in C or Python. The 3A SMPS (Switch Mode Power Supply) module powers the PiCAN FD LIN-bus board and Raspberry Pi from 7 VDC to 24 VDC external supply.
The Teensy 4.0 with CAN FD and LIN Bus is a CAN FD breakout board for use with the Teensy 4.0 (included in the scope of delivery). It has an onboard 5 VDC regulator with reverse voltage protection and a CAN FD transceiver. The Microchip MCP2004A chip provides the LIN Bus connection. The Teensy is a complete USB-based microcontroller development system compatible with Arduino software and libraries. It comes with a minimal footprint and is capable of implementing many projects. All programming is accomplished via the onboard USB port.
More on The Floridant
Furthermore, Copperhill Technologies offers a LIN Bus breakout board with a Microchip MCP2004A transceiver for all other embedded systems. The connection between the LIN bus breakout board and an embedded system, such as the Arduino, is a simple standard UART connection. The board complies with SAE J2602 and meets LIN Bus Specifications 1.3, 2.0, and 2.1. It can operate in Master or Slave mode through an onboard jumper.
The Raspberry Pi Pico LIN Bus board supports the programming of automotive applications using MicroPython. The RPi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It features two ARM Cortex-M0+ cores that run up to 133MHz, 256KB RAM, 30 GPIO pins, and a wide range of interfacing options. These features are paired with 2MB of onboard QSPI Flash memory for code and data storage. In addition to powerful hardware resources, the Pico offers rich and complete software support and community resources. It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
More on The Floridant
- Messageware Z-Day Guard v1.5 Expands MDR Security to Azure, Exchange, and Windows Servers
- Better Together to host community job fair and second chance hiring event in Jacksonville
- Survey Uncovers Spicy Truth: 1 in Every 2 Singles Has a Sexual Kink, Fetish, or Fantasy
- De'Garryan Andrews Takes Center Stage in Anthony Lamarr White's "Hour of the Wolf"
- Unlock Your Travel Dreams with 1234travel.com
This PiCAN FD board has a LIN Bus interface, and the Microchip MCP2518FD IC provides classic CAN and CAN FD. A dsPIC33 microcontroller provides the LIN Bus connection. Communication to the Pi is per UART on ttyS0 using ASCII text commands. A sample LIN-bus GUI app is available, written in Python3 and tkinter. The firmware is updatable using the Microchip UnifiedHost java app, which requires the Raspberry Pi to run in GUI mode. There is an easy-to-install SocketCAN driver, and programming is supported in C or Python. The 3A SMPS (Switch Mode Power Supply) module powers the PiCAN FD LIN-bus board and Raspberry Pi from 7 VDC to 24 VDC external supply.
The Teensy 4.0 with CAN FD and LIN Bus is a CAN FD breakout board for use with the Teensy 4.0 (included in the scope of delivery). It has an onboard 5 VDC regulator with reverse voltage protection and a CAN FD transceiver. The Microchip MCP2004A chip provides the LIN Bus connection. The Teensy is a complete USB-based microcontroller development system compatible with Arduino software and libraries. It comes with a minimal footprint and is capable of implementing many projects. All programming is accomplished via the onboard USB port.
More on The Floridant
- Plant-Based Initiative Launches the First Evidence-Based Dietary Guideline
- The Ripple Effect Arts, has launched its latest product, Organic Wild Yam Cream, capitalizing on the company's recent viral success on TikTok
- Prince of Eurasia: Monotheism and Devils — the ultrarare Eurasian theological documentary of executive producer Prince Oak Oakleyski
- Yachting Experts Hosts Beach Cleanup at Juno Beach
- BIZCATALYST 360° Receives Innovation In Business Award
Furthermore, Copperhill Technologies offers a LIN Bus breakout board with a Microchip MCP2004A transceiver for all other embedded systems. The connection between the LIN bus breakout board and an embedded system, such as the Arduino, is a simple standard UART connection. The board complies with SAE J2602 and meets LIN Bus Specifications 1.3, 2.0, and 2.1. It can operate in Master or Slave mode through an onboard jumper.
Source: Copperhill Technologies Corp.
Filed Under: Automotive, Technology
0 Comments
Latest on The Floridant
- Coral Springs Center for the Arts to Present All New WILD KRATTS LIVE 2.0 - February 23, 2025
- The Frank Pembroke Pines Presents "The Crossings: A Global Movement Experience" Fall Exhibition
- Florida: MEMORANDUM: Flags at Half-Staff in Honor of Patriot Day
- Globant Acquires Blankfactor to Strengthen Its Payments, Banking, and Capital Markets Practice in the US
- Florida: Governor DeSantis Announces over $122 Million for Rural Infrastructure
- Sponsors needed for the 2nd Annual 'Bourbon & Bubbly' event
- Policy vs Politics Rebrands to Everything Policy: A New Era of Facts-first Policy Content
- RevUp Founders Bring The Executive Studio to Women in Insurance Tech Conference in Boston to Elevate Women Leaders in the Industry
- GitKraken Launches DevEx Advance Partner Program to Help Atlassian Solution Partners Elevate Their Clients' Developer & DevOps Team Productivity
- Priority Marketing adds Ed Kitsos as senior media buyer
- Same day auto glass repair is a priority after a major storm
- First Lady Casey DeSantis Highlights Hope Florida's Role with the Florida Department of Juvenile Justice
- Dezerland Park to host GEM Wedding Expo
- Phinge's Plan to Save Free Speech and Give Everyone the Right to Personal Privacy and Ownership and Monetization of Their Online Data and Content
- Bright Mountain Media Appoints Industry Veteran Joe Pergola as Director and Audit Committee Chair
- SCORE Supports Hispanic Entrepreneurs With Free Mentoring Services
- The Royalty Network and CEO Frank Liwall Appoint Daniel Abowd as New President & General Counsel
- Guadalupe Center launches 'RISE' program for Immokalee middle schoolers
- GreenPointe Developers Welcomes Megan Maldonado as Developed Real Estate Manager
- DiSTI Selected to Deliver M1A2 Variant Training Program to EUCOM and INDO-PACOM Areas of Responsibility (AOR)